PNWDS - PNWDualSport

A Place to Share Your Dual Sport Passion

Established Jan 03, 2009
 
HomeHome  FAQFAQ  SearchSearch  UsergroupsUsergroups  RegisterRegister  Log inLog in  

Share | 
 

 DIY: Steel Mesh Brake Lines

View previous topic View next topic Go down 
AuthorMessage
TrailOut

avatar

Posts : 9
Join date : 2013-07-09

PostSubject: DIY: Steel Mesh Brake Lines   7/16/2013, 4:43 pm

Hi everyone  


I’d like to share a TrailOut LAB video. This one teaches you exactly how to make steel mesh brake lines for your bike/car in an inexpensive way.





"Common (rubber) brake tubes will not maintain their inner radius when the oil inside them reaches a certain temperature. Hard riding will stress the brakes making the whole line (disks, pads, oil & tubes) over-heat resulting in inconsistent or even lack of braking power.
Needless to say that this won't ever happen with a steel mesh braking line"


Disclaimer: This alteration is NOT street-legal in some countries. Please use at your own risk and preferably in off-road or race vehicles only. Not TUV/DOT approved. For your information only 
Back to top Go down
 
DIY: Steel Mesh Brake Lines
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
PNWDS - PNWDualSport :: Main :: Bike Mods/Tech Tips/How To Articles-
Jump to: