PNWDS - PNWDualSport

A Place to Share Your Dual Sport Passion

Established Jan 03, 2009
 
HomeHome  FAQFAQ  SearchSearch  UsergroupsUsergroups  RegisterRegister  Log inLog in  

Share | 
 

 KTM 530 EXC No pressure reading

View previous topic View next topic Go down 
AuthorMessage
nickthegreek



Posts : 2
Join date : 2012-02-19

PostSubject: KTM 530 EXC No pressure reading   2/19/2012, 11:46 am

Hey guys, the formula student team in my uni is using a KTM 530 EXC engine to power the car. The engine has just been rebuilt but the ECU is reading no oil pressure . We checked the wiring and the sensor and is perfectly fine. The oil filter is brand new and clean and the gear box and engine oil screens are clean as well. Does anybody have any suggestions?? Thanks!!
Back to top Go down
dhally

avatar

Posts : 167
Join date : 2009-01-17
Bike : WR250R, Sherco 300i

PostSubject: Re: KTM 530 EXC No pressure reading   2/19/2012, 2:30 pm

nickthegreek wrote:
Hey guys, the formula student team in my uni is using a KTM 530 EXC engine to power the car. The engine has just been rebuilt but the ECU is reading no oil pressure . We checked the wiring and the sensor and is perfectly fine. The oil filter is brand new and clean and the gear box and engine oil screens are clean as well. Does anybody have any suggestions?? Thanks!!

Off the cuff is everything grounded properly? These bikes have some funky wiring - hopefully you have a wiring diagram.

You might also ask at ktmtalk.com or advrider.com
Back to top Go down
nickthegreek



Posts : 2
Join date : 2012-02-19

PostSubject: Re: KTM 530 EXC No pressure reading   2/19/2012, 11:35 pm

dhally wrote:
nickthegreek wrote:
Hey guys, the formula student team in my uni is using a KTM 530 EXC engine to power the car. The engine has just been rebuilt but the ECU is reading no oil pressure . We checked the wiring and the sensor and is perfectly fine. The oil filter is brand new and clean and the gear box and engine oil screens are clean as well. Does anybody have any suggestions?? Thanks!!

Off the cuff is everything grounded properly? These bikes have some funky wiring - hopefully you have a wiring diagram.

You might also ask at ktmtalk.com or advrider.com


We have checked the continuity and everything was ok. I will check the website you've sent though. Thanks a lot
Back to top Go down
Sponsored content




PostSubject: Re: KTM 530 EXC No pressure reading   

Back to top Go down
 
KTM 530 EXC No pressure reading
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
PNWDS - PNWDualSport :: Main :: General Bike Discussion-
Jump to: